Before you do garage door repair, you need to know what to look for. In today’s technological world, there is new information and technology available for homeowners. Everyone wants to save a few bucks and do it themselves. This is a popular option but many people don’t know what to take a look at and diagnose what the problem may be. There are many parts on a garage door and all of them need to be checked. Occasionally, they may need maintenance or repair. Before you tackle this project, get some basic information first.
Diagnosing the Problem: The First Step
Before you do anything at all, you need to diagnose exactly what the problem is. You can’t attempt any repairs without this. If you don’t know the parts of a garage door, you’re not going to get anywhere. Get information on this first and see why it’s not working. Check all of the parts like the springs, the opener, screws and bolts. Sometimes you just need to tighten something and sometimes it’s more difficult than this. Troubleshooting is an important step to save you time later when you want to do garage door repair yourself.
The Parts for Garage Door Repair
Do you know exactly which part you need to buy? Did you buy one already only to find it’s not the right one? The most important step to fix the problem yourself is to determine exactly what part needs to be repaired or replaced. There are many different springs available and different sizes because not all garage doors are the same. You need to figure out which one you need. The worst thing you can do is order it online. You may be better off removing the spring and taking it to the hardware store with you to find a perfect match. If you replace the broken part with the wrong part, will your garage door work properly? The answer to this is no. It can also be a safety risk so be careful.
Tools for Garage Door Repair
Just like with buying the right part, you need to have the perfect tool to do a perfect job. Don’t try taking any shortcuts because this may lead to more expenses later if you make a silly mistake. Make sure you have the right tools since you can’t use a screw driver for a bolt or a pair of pliers for nails and screws. Using the wrong tool will make the work harder and also unsafe. If you’re not sure what you need, you can find plenty of information on the topic.
Your Safety during Repairs
Since garage doors are very big, you can easily get hurt if you do something wrong. You need to know what you’re doing and how to do it before you even attempt this DIY project. You don’t want any injury to yourself or anyone else. If you’re afraid of jeopardizing this, call someone in to help or do it for you.
Tips for Garage Door Repairs
Some garage doors have openers and some don’t. This is very convenient if you do have one so you don’t have to get out of the car and open it yourself or close it yourself. You don’t realize what you have until it’s gone. If it doesn’t work, you’ll probably feel lost. Not having one or a working one is a big inconvenience. You don’t appreciate it when it works and when it doesn’t you do.
If you’re nervous about fixing it yourself, you can use some tips to get the job done right. There are easy things you can do to start with.
Keep it Clean
Sometimes, a little thing like cleaning your garage door springs and parts can work wonders. What if something gets stuck in it? Removing the build-up can also help get it back up and running. The dust and dirt build up can cause it to stop working properly. Check the tracks and clean them once in a while. To keep it working properly, do routine maintenance just like with your car. After all, the garage could be your car’s home.
Check for Loose Bolts
With time and usage, things can come loose. Bolts are no different. By opening and closing your garage door, it loses its touch compared to when it was new and this is natural for everything in this world. Sometimes a little thing like tightening a bolt will do the trick. If you notice anything is loose, simply do this step to prevent more headaches later.
The Power Supply
Check if the unit is plugged in. You may laugh but you’d be surprised how many people think they need garage door repair when it was a simple fix like plugging it back in to the power supply. If it’s already plugged in, try another socket. Check the power cord and make sure there isn’t anything wrong with it.
The Garage Door isn't Opening
You need to check the remote control battery and replace it if necessary. If this doesn't work, you need to check the installation of the unit. Before you do garage door repair, you should call the person who installed it if it’s new. If the battery or installation isn’t the problem, check if there is something in the track blocking its ability to open. Maybe it’s rusted and needs to be replaced. Sometimes lubricating it will work also to get it open.
The Garage Door isn’t Closing
This can sometimes happen if the light beam sensor is faulty. New doors have this feature if someone or something gets in the way. The feature was developed for safety. Once the object is moved away, it will close again. If there isn’t anything there, you need to check and make sure the unit is installed properly.
Noisy Garage Door
When it comes do garage door repair, you need to figure out why it’s making so much noise. Sometimes lubrication will fix the problem. It may also be a problem with the chain and belts. Look for any time of damage and if necessary replace the broken part.
If you have a garage and the door isn’t closing properly it can put your safety and well-being on the pedestal. It’s a security risk for you and your family. What if an animal that’s dangerous gets in there and you open another entrance to it. Someone can get hurt.
You need garage door repair right away if you notice a problem. If it’s something little you can do it yourself but if it’s bigger than the little things mentioned here, and you don’t know what to do or how to handle it, it’s best to call a professional (Garage door repair Castle Rock) and get it done right. A lot of times, the expense increases if your DIY efforts end up down the drain because of improperly installed parts or a misdiagnosis of the problem. Don’t take this chance and call someone in to get it fixed permanently. The longer you wait, the better the chances someone can get hurt. Be proactive and stop this from happening.